Series 24 SSR闭锁继电器Series 24 SSR
详细信息
| | 品牌：Electroswitch | | 型号：Series 24 SSR | | 应用范围：Series 24 | |
| | 额定电流：10 A | | 额定电压：220 V | | 触点负载：50 | |
| | 触点切换电流：50A | | 触点形式：自动 | | 防护特征：Series 24 | |
Series 24 SSR闭锁继电器Series 24 SSR产品简介：
The Series 24 Selector Switch Relay (SSR) is an auxiliary relay that combines electrical and
manual operation in a single unit for multiposition applications. Basically a unidirectional
(CCW) stepping switch, the SSR can be used in any 2 to 8 position application. The SSR is
ideally suited for tapswitch applications or any other multiposition application where simple or
complicated contacting is used.
Note: The Series 24 SSR Class 1E utility products comply with the following Nuclear
Standards: ANSI/IEEE C37.90, ANSI/IEEE C37.90.01, ANSI/IEEE C37.98, ANSI/IEEE
C37.105, ANSI/IEEE 323, ANSI/IEEE 344, ANSI/ASME NQA -1.
Series 24 SSR闭锁继电器Series 24 SSR产品技术参数：
The Series 24 Selector Switch Relay
HIGH QUALITY • Designed and manufactured to the highest standards in the
industry
• Qualified to UL, CSA
VERSATILITY • 2 to 8 unidirectional multiposition
• Up to 10 decks and 20 poles
• Available for electric or manual operation
• 3 switch circuits - One to match your application needs
SERVICE • The Electroswitch team of Customer Service and Applications
Professionals stand behind every Electroswitch product. Let us
put over 50 years of know-how to work for you!
Series 24 SSR闭锁继电器Series 24 SSR产品操作：
Basic Circuit Operation
The control of the CSR Control Switch Relay for electric operation requires no special wiring. It
only requires two contacts (S1 and S2) to command the CSR to either the TRIP or CLOSE
position. Low level contacts (rated 1 ampere) may be used since S1 and S2 do not control
the rotary drive solenoid directly.
The standard station control bus voltage is used on all three circuits. The device, when shown
in the following figures is in the vertical NORMAL position. The CSR coil form shown on the
figures represents the rotary solenoid that drives the CSR. Its operation is further described
later. LS1 is a linear solenoid within the device that changes the sense of direction of the CSR
from left (TRIP) to right (CLOSE). The contacts shown as CSR are contacts within the device.
Other components are shown by conventional designations.
Mechanical Target
When the CSR Switch handle is turned, a mechanical target contained in the nameplate is
turned as well (GREEN for TRIP, RED for CLOSE). The target remains latched when the handle
returns to normal position and always shows the last active position.
扫一扫，手机浏览
￥15099.00
￥16099.00
￥5599.00
￥23099.00
